SOLTHERM SP
Deep penetrating substrate primer for absorbous substrates
Suitable to prime the surface prior to pouring screeds and underlayments /cement or anhydrite/ and prior to waterborne acrylic and vinyl acrylic paint (emulsion paint) application. Primes porous and dusty mineral surfaces such as: concrete, cellular concrete, cement and anhydrite screeds, gypsum finishes, drywall and cement and lime plasters. It penetrates deep into the surface, seals it off and promotes adhesion of paint and plaster finishes. Seals off, reduces and evens out any surface porosity and consolidates dusty or friable surfaces. Protects the primed surface against adverse effect of moisture penetration. Evens out the setting and drying process of the installed screed or underlayment. Seals and blocks out stains in base coats. Prevents stains and contaminations from bleeding through into paint coats, eliminates staining.
Deep penetrating substrate primer for absorbous substrates
- The surface must be sound, even, clean of substances which can cause separation (such as dust, grease, bitumen) free of cracks as well as biological growth and chemical deposits. Remove any friable material, peeling or flaking paint or plaster. Fill gaps and imperfections /between 5 and -15 mm/ with the mortar SOLTHERM LRC and even out the entire surface with the adhesive SOLTHERM UB (alternatively WB or BC-P as necessary). Minor irregularities /up to 5 mm/ may be evened out at once with the adhesive SOLTHERM UB.
