1. Substrate
SOLTHERM PREMIUM ACRYLIC & PREMIUM SILICONE must only be utilised on masonry substrates. The substrate must be clean, dry and free from friable and/or deleterious material prior to the application of the system.
2. Adhesive
Grey cementitious adhesive with great adhesion strength for bonding EPS insulation.
3. EPS Insulation
Graphite-enhanced (grey) EPS insulation boards with thermal conductivity coefficient 0.031 W/mK or more.
4. Mechanical Fixings
ETA approved screw-in or hammerset fixings with steel
nails are used. Refer to Soltherm standard details as well as fixing pattern implemented in the specification.
Stainless steel fire fixings are required above second storey and are to be installed through the reinforcing mesh coat.
5. Soltherm UB or Soltherm UB Special
Grey cementitious basecoat designed to encapsulate the reinforcement mesh, providing the system with water resistivity, breathability and impact protection.
6. Soltherm Glass Fibre Mesh
An alkali resistant reinforcement mesh bedded into the basecoat providing increased flexibility, durability and impact resistance.
7. Soltherm SNP Colour
Tinted base coat primer, allowing it to penetrate deep into the base coat. This aids the adhesion of the finish coat and ultimately improves the systems durability.
8. Soltherm SFC-P 15 or Soltherm AF-P+ 15
Silicone textured silicone finish offering the diverse colour, enhanced algae and fungal growth resistance, UV radiation resistance, lower water absorption and flexibility.