ICF FINISH SYSTEMS

ICF FINISH SYSTEMS

1. ICF NSAI approved system
2. Soltherm BC-P Quick Base Coat
Premium white cementitious impact protection base coat designed to encapsulate the reinforcement mesh, providing the system with water resistivity, breathability.
3. Soltherm Glass Fibre Mesh
An alkali resistant reinforcement mesh bedded into the basecoat providing increased flexibility, durability and impact resistance.
4. Soltherm SNP Colour Primer (if required)
Tinted base coat primer, allowing it to penetrate deep into the base coat. This aids the adhesion of the finish coat and ultimately improves the systems durability.
5. Soltherm SFC-P15 or Soltherm AF-P+15 Finishing Coat
Silicone textured silicone finish offering the diverse colour, enhanced algae and fungal growth resistance, UV radiation resistance, lower water absorption and flexibility.

ICF FINISH WITH RENDER

ICF FINISH WITH TRADITIONAL BRCIK SLIPS

ICF FINISH WITH NATURAL STONE SLIPS

ICF FINISH WITH ELASTIC BRCIK SLIPS


ULTIMATE MW SYSTEMS

SOLTHERM ULTIMATE MW SYSTEMS

based on mineral wool boards

ULTIMATE SILICONE-ACRYLIC

ULTIMATE HD SILICONE-ACRYLIC

ULTIMATE A1 DASH

ULTIMATE HD A1 DASH

ULTIMATE SILICONE

ULTIMATE HD SILICONE


TRADITIONAL & ELASTIC BRICK SLIPS & NATURAL STONE SYSTEMS

EWI SYSTEM ON EPS WITH TRADITIONAL BRICK SLIPS

EWI SYSTEM ON MW WITH TRADITIONAL BRICK SLIPS

EWI SYSTEM ON EPS WITH NATURAL STONE SLIPS

EWI SYSTEM ON MW WITH NATURAL STONE SLIPS 

EWI SYSTEM ON EPS WITH ELASTIC BRCIK

EWI SYSTEM ON MW WITH ELASTIC BRCIK SLIPS


PREMIUM EPS SYSTEMS

SOLTHERM PREMIUM EPS SYSTEMS

1. Substrate
It must only be utilised on masonry substrates. The substrate must be clean, dry and free from friable and/or deleterious material prior to the application of the system.
2. Adhesive
3. EPS Insulation
4. Mechanical Fixings
5. Base Coat
6. Glass Fibre Mesh
7. Primer 
8. Finishing Coat 

PDQ ACRYLIC/ PDQ SILICONE

PREMIUM ACRYLIC

PREMIUM SILICONE

PREMIUM DASH